The Cellular Necklace is, visually, the opposite of a typical necklace: instead of a solid form you look at the surface of, you're looking partly through it. That's not a visual trick added after the fact. An open, cell-like lattice worn as jewelry is a real design problem with real constraints, and it's worth walking through what that problem actually involves.
The tension at the center of any lattice piece
A lattice structure is, by definition, mostly empty space held together by a network of thin connections. For jewelry, that creates three things pulling against each other at once. Open the cells up for more visual lightness and airiness, and the structure gets less rigid — a necklace gets handled, flexed, caught on clothing, and a too-delicate lattice is a necklace that eventually breaks. Tighten the cells up for strength, and it starts looking like a dense mesh instead of an open, breathing structure — the whole point of the shape disappears. And underneath both of those: every bit of added material is weight a wearer carries all day, on the neck, which is one of the less forgiving places to wear something heavy.
Those three things don't resolve to one "correct" answer. A lattice piece that works is a piece where someone decided, deliberately, where the trade-off lands — usually not uniformly. A well-designed lattice piece doesn't need the same density everywhere. The places carrying the most mechanical stress (where a necklace meets its clasp or connection point, where the structure has to support the weight of everything hanging below it) can be built denser and more reinforced, while the areas carrying no real load can open up as far as the aesthetic wants to take them. That's a decision made piece by piece across the form, not a single setting applied everywhere — which is exactly the kind of decision a parametric model is built to carry out, once a person has decided where the density should vary and why.
Why a mold was never the plan
Here's the part that ties the shape back to the material: there's no reasonable way to cast a lattice like this. A mold needs a cavity it can be pulled back out of, and an open cellular network has no single "outside" to release from — cells everywhere, no flat parting line to split a casting flask along, no clear front or back to the structure at all. A shape like this was never a metal design that got adapted to printing. It's a shape that's only reachable because printing removes the mold from the process entirely: a laser fusing nylon powder layer by layer doesn't need to release anything from a cavity, so there's no cavity constraint to design around in the first place.
What's left for the printed piece to prove
None of this guarantees the result looks right. A lattice that's structurally sound and respects the material's weight budget can still fail as a piece of jewelry if the proportions are off, if the cells read as random instead of considered, or if it just doesn't move the way a necklace needs to move against a body. That final judgment — does this specific version of the shape actually look and feel like it's supposed to be worn — isn't something the engineering constraints answer. It's the same designer's-eye decision described in the piece on parametric design: the rules make a shape buildable. They don't make it good.
Related reading: Parametric by Design: The Process Behind Nylon Jewelry's Shapes · SLS, FDM, MJF: How 3D-Printed Jewelry Is Really Made · Unexpected Material. Extraordinary Possibilities.
Shop this piece: The Cellular Necklace →
NylonJewelry.com is published by Oliver Hampel, who also designs and sells nylon jewelry at OliverJewelry.com.