SLS, FDM, MJF: How 3D-Printed Jewelry Is Really Made

Materials & Process

"3D-printed jewelry" sounds like one thing. It's actually several completely different manufacturing processes that happen to share a name — and the process determines everything about what you end up wearing. Here's what the acronyms mean and why they matter.

The three processes that matter for jewelry

SLS — Selective Laser Sintering (the jewelry standard)

A bed of fine nylon powder (usually PA 12) is spread in layers about the thickness of a human hair. A laser traces each layer's shape, fusing the powder into solid plastic. The unfused powder surrounding the piece acts as support, so no support structures need to be printed and broken off — which is why SLS can produce interlocking chains, hollow lattices, and moving hinges as a single piece.

Why it's the standard for nylon jewelry: excellent detail, strong, nearly isotropic parts (close to equally strong in every direction, unlike layer-built FDM), no visible layer lines after finishing, and that support-free freedom that makes the impossible geometries possible.

MJF — Multi Jet Fusion (the industrial cousin)

HP's process: instead of a laser tracing shapes, inkjet-like heads deposit fusing agents onto the powder bed, then heat lamps fuse each layer. It's faster than SLS for production runs and produces parts with very similar properties — strong, detailed nylon.

For jewelry: MJF pieces are excellent, functionally close to SLS. The practical difference for a buyer is small; both are professional processes. One visible difference: MJF parts come out of the machine gray rather than white, so MJF jewelry is usually dyed black or other dark colors. You'll see MJF more in production-scale work, SLS more in studio and bespoke pieces — a reflection of machine access, not quality tiers.

FDM — Fused Deposition Modeling (the desktop one)

The process most people picture: a nozzle extrudes melted plastic filament, building the shape line by line, like a precise hot-glue gun. Supports must be printed for overhangs and snapped off afterward.

For jewelry: FDM is the wrong tool for fine work. Visible layer lines, weaker along layer boundaries, support marks to clean up, and limited detail. It's fine for prototypes and fun chunky pieces — it's how many designers prototype before sending the final file to SLS — but a finished FDM piece is visibly not in the same league. If a listing doesn't name its process, and the piece shows layer lines, you're probably looking at FDM.

The short version

SLS MJF FDM
How it builds Laser fuses powder Fusing agent + heat on powder Nozzle extrudes filament
Detail Excellent Excellent Coarse, visible layers
Supports needed No (powder supports) No (powder supports) Yes (breakaway marks)
Strength Strong all directions Strong all directions Weaker between layers
Jewelry verdict The standard Equally good Prototypes, not fine pieces

One line to remember: if a seller won't name the process, assume the cheapest one.

What happens after printing (where quality is decided)

A raw SLS print looks chalky white or gray and feels slightly grainy. Everything that makes it jewelry happens next:

  1. Depowdering and blasting. Loose powder is removed (and largely recycled back into the machine), then the piece is bead-blasted to an even, smooth surface. Skimp here and the piece feels powdery forever.
  2. Coloring. Most makers submerge the piece in heated dye that penetrates the nylon itself; some paint or coat the surface instead. Which one was used tells you a lot about how the color will wear — the most useful distinction in this guide.

Dyed vs. painted: know which you're buying

Dyed nylon: color penetrates into the material. It can't peel, flake, or chip off because it isn't a surface layer — it's part of the plastic. Light scratches show more color, not white plastic. Hand-dyeing builds depth and subtle variation. (For a maker's-eye view of how the dye goes in, Oliver Jewelry's guide hub covers it from inside a working studio.)

Painted or coated nylon: color sits on top. That lets a maker do things dye can't — crisp two-tone surfaces, hard color edges — but a surface layer can wear at edges and high points over years of daily use, and a deep scratch shows the base material. Well-applied finishes on considered designs last; cheap coatings on fine lattices are the ones that fail.

How to tell before you buy:

  • Ask. "Is this dyed or painted?" is a completely reasonable question, and a good maker answers it plainly.
  • Look at edges and recesses. Paint pools in crevices and wears first on high points. Dye is even everywhere.
  • Price is a signal, not proof. Good dyeing and good painting are both skilled handwork; suspiciously cheap "vibrant" pieces deserve the question.
  • Check the listing language. "Hand-dyed" and "hand-painted" are specific claims. Vague terms like "colored," "finished in [color]," or no mention at all warrant a question.

For a piece worn every day, this distinction predicts more about how it will look in five years than any other factor.

A note on "handmade"

You'll see 3D-printed jewelry marketed as both "handmade" and "not handmade," sometimes by the same seller. The honest description: digitally designed, machine-printed, hand-finished. The machine does what machines do best (precision, repeatability, impossible geometry); the human does what humans do best (design, dyeing, finishing, judgment). Anyone claiming a piece is 100% handmade is omitting the printer; anyone implying no handwork is involved hasn't watched a maker dye and finish a batch.

Frequently asked questions

Is SLS jewelry durable?

Yes — properly printed PA 12 is tough, slightly flexible, and nearly equally strong in all directions (unlike FDM, which is weak between layers). It's why the same process makes functional engineering parts.

Why does SLS jewelry cost more than FDM jewelry?

Industrial SLS machines cost many times more than desktop FDM printers, the powder is an engineering material, and the hand-finishing (blasting, dyeing, inspection) is skilled labor. You're paying for a different manufacturing tier, not a markup on the same thing.

Can you tell SLS from MJF by looking?

Honestly, no — not reliably. Both produce smooth, detailed nylon. (MJF's gray base usually limits it to darker colors, so a bright or pastel piece is more likely SLS.) Treat them as equivalent for buying decisions.

What is "sintered nylon" — is that different?

No, it's the same thing. "Sintered" describes the fusing process in SLS; "sintered nylon jewelry" and "SLS nylon jewelry" are two names for one thing.

Do 3D-printed pieces have layer lines?

SLS and MJF pieces shouldn't show any after proper finishing. Visible layer lines mean FDM — or SLS that skipped proper blasting.

NylonJewelry.com is published by Oliver Hampel, who also designs and sells nylon jewelry at OliverJewelry.com.