"How 3D-Printed Jewelry Is Really Made" covers the printer: the laser, the powder bed, the layers. This one covers what happens before any of that — the part where a piece gets its shape in the first place, which for this collection doesn't start with a sketch.
What "parametric" means, in practice
Traditional jewelry design usually starts with a drawing or a carved wax: a fixed shape, refined by hand until it looks right. Parametric design, built here in Grasshopper running inside Rhino, starts with relationships instead of a fixed shape — rules that say how a form behaves, not what it looks like at one specific size. How a lattice's cell spacing changes as it wraps a curve. How a strand's thickness responds to the load it needs to carry. How an edge tapers as it approaches a setting.
The practical difference: changing one rule regenerates the entire form instantly, consistently, everywhere that rule applies. Changing one line on a fixed sketch just changes that line. That's the whole reason this tool gets used instead of traditional drafting — not because it's more modern, but because some of these shapes have no other reasonable way to be drawn by hand at all.
What that actually makes possible
Take the Cellular Necklace. An open, cell-like lattice like that isn't hand-placed cell by cell — it's governed by a rule for how dense the structure gets and how it should thin or thicken across the piece. Adjust that rule and the whole lattice responds together, the way adjusting a single setting reflows an entire pattern rather than one spot of it.
Or the Angel Earrings, where the negative space is the design, not a gap left over by it. Getting negative space to read as intentional rather than accidental is a balance problem — too much and the form disappears, too little and it just looks like a solid shape with holes punched in it — and that balance gets tuned the same way: as a relationship between the solid and the void, adjusted as a whole rather than redrawn piece by piece.
Or the Big Infinity Heart Earrings: one continuous loop with no start or end point, no joint, no seam. A shape like that has to be defined as a single continuous path from the beginning — it's not something you build by assembling separate pieces and hoping the seam disappears, because there isn't a seam to hide.
Where the software's job ends and a person's job starts
None of this means the computer is designing the jewelry. A parametric model generates what a rule allows — it doesn't know which version of that rule looks good. That part is still entirely a person's call, made the slow way: nudge one parameter, look at what changes, decide if it's better or worse, nudge it again. A session of refining one piece might mean dozens of small adjustments before the proportions, the balance, and the scale all land somewhere that reads as a finished piece of jewelry rather than an interesting shape. The software makes that iteration fast. It doesn't make the decision for you.
That's worth saying plainly because it's easy to overstate: a rule-based model can generate a lot of options very quickly, and the gap between "a lot of options" and "the right one" is exactly the part that doesn't automate. Most explorations get discarded. Some that work mathematically still get cut because they just don't look right at jewelry scale, on a body, in person — a parametric model can't see that; a designer has to.
Why this pairs specifically with nylon
Here's the part that connects this back to the material itself: a parametric model built this way can be printed close to exactly as designed, because selective laser sintering doesn't need a mold, a cavity, or a parting line to release the piece from. The same complex, continuous, lattice-based geometry that's straightforward to define as a set of rules would often be close to impossible to actually cast in metal — undercuts a mold can't release, structures with no clear front or back, forms with no flat parting line to split a casting flask along. Parametric design and SLS printing solve two different halves of the same problem: one makes a complex form easy to define, the other makes it possible to actually build without simplifying it down to something a mold could handle.
Related reading: SLS, FDM, MJF: How 3D-Printed Jewelry Is Really Made · Nylon Jewelry: The Material and the Makers · Unexpected Material. Extraordinary Possibilities.
Explore the collection: Shop the Oliver collection →
NylonJewelry.com is published by Oliver Hampel, who also designs and sells nylon jewelry at OliverJewelry.com.